|
|
Platform Feeder Cart
Universal's Platform Feeder Cart offers versatility, organization and protection for your feeders within the production environment. An investment in platform feeder carts can realize cost savings by reducing cycle time. An essential accessory for your production environment.
Protect your investment
Have you purchased reels of high end components? Protect from damage by storing on a feeder cart. During transportation, the feeders are latched and pinned avoiding potential for damage. Don't take chances on loss of product by incorrectly storing high end components.
Pre-load your job
Be ready for quick changeover when you need the next job loaded. Have specific components ready to go, pre-loaded and ready on the feeder storage cart. The footprint is designed to transport equipment and product easily down crowded production aisles. Lost time can be costly. Just roll the cart over to your Universal Platform Machine. By having your job ready to go, you reduce cycle time thus saving money!
Click Below to Order:
Platform Feeder Cart 50901401
Note: This cart will hold 72 single lane or dual lane 8 mm feeders or some combination of both.
Platform Feeder Input Reference ChartFor Reference Only
| Feeder |
Size |
Number of Feeder Slots Consumed (Total Available=72) |
| Tape Feeders
|
Dual Lane 8mm |
1 Slot - two 8mm inputs |
|
|
8mm and 12mm |
1 Slot |
|
|
16mm, 24 mm, 32mm |
2 Slots |
|
|
44mm |
3 Slots |
|
|
56mm |
4 Slots |
|
|
72mm |
5 Slots |
|
|
88mm |
6 Slots |
|
|
104mm |
6 Slots |
|
|
120mm |
7 Slots |
| Track Feeder
|
|
3 Slots (dependent on # of Tracks) |
| Multi-Tube Feeder (MTF)
|
40mm |
2 Slots |
|
|
50mm |
3 Slots |
| Platform Tray Feeder1
|
|
0 Slots |
| Stackable Matrix Tray
|
|
9 or 12 Slots |
| Stationary Matrix Tray Feeder
|
|
8, 13, or 18 Slots |
| Direct Tray Feeder2
|
|
Bank 1 or Bank 3 |
| Direct Pick Matrix Tray Feeder2
|
|
Bank 1 or Bank 3 |
| Component Reject Station
|
|
3 or 5 Slots |
| Strip Feeder
|
|
8 Slots |
| Magellan ULC
|
|
6 Slots |
1Can be mounted in either the left or right rear corners
2Consumes the entire feeder bank, maximum of two DTF's per machine
See all UIC Platform Products or return to the Parts Store.
Not registered to use the Internet Shopping Center? Click here to request access. For additional information contact us.
|
|