|
Flat Belt Conveyor | |
Standard Features
- Configurable conveyor length
- 457.2 mm (18.0”) belt width
- Variable speed transfer drive motors
- Programmable controller
- Built-in SMEMA compatibility
This diagram graphically represents
the operation of the conveyor.
| | Options
- Left to right or right to left transfer direction
- 304.8 mm (12.0”), 381.0 mm (15.0”), 533.4 mm (21.0”), or 609.6 (24.0”) belt widths
- Multiple belt section configuration
- Manual assembly workstation table & workstation options
- Transfer/inspect capability
- Incline/decline kits
- Variable transfer heights
|
| Board Specifications |
|
|
 | Minimum | Maximum |
| Length | 76.2 mm (3.0") | Conveyor Length Dependent1 |
| Width | 50.8 mm (2.0") | Conveyor Width Dependent2 |
| Weight (per belt section) | --
| 6.80 kg (15 lbs.) |
1Board length should be at least 50.8 mm (2.0") less than conveyor or belt length.
2Board width should be at least 12.7 mm (0.50") less than belt width.
|
|
| Performance Specifications |
|
|
| Belt Transfer Speed (per second) | 13.0 mm (0.5”) to 254.0 mm (10.0”) |
|
| Control Module | PLC (Programmable Logic Controller - Allen Bradley) |
| Transfer Motor | Variable speed DC - continuous duty rated |
|
| |
|
| Physical Dimensions |
|
|
| Length | 305 mm (24.0”) to 3.05 m (120.0”) |
|
| Belt Width | 304.8 mm (12.0”), 381.0 mm (15.0"), 457.2mm (18.0"), 533.4 mm (21.0"), 609.6 mm (24.0”) |
| Transfer Height | 914.4 mm (36.0”) to 1.07 m (42.0”) |
|
| |
|
| Service Requirements |
|
|
| Electrical | 90-132 vAC, 50/60 Hz, 5.0 Amps or 180-264 vAC, 50/60 Hz, 2.5 Amps
|